uPVC Window Repair
Although uPVC windows are tough and resistant to extreme weather conditions, they are not immune to issues that need fixing. Luckily these problems can be fixed at a less than the cost of replacing a window.
A common problem is that windows become difficult to open because the hinges are stiff. This can be easily resolved by lubricating hinges using WD-40.
Cracked or broken glass
We have glass all over our homes: in doors, windows, surfaces and tables, on the front of stoves and microwaves, and even in picture frames. Windows can break due to a good hit or rough-housing between friends. They must be repaired before they become worse. Luckily, these types of cracks are very easy to repair without having to replace your window glass or frame.
First, clean the area with a damp cloth to remove any dust, dirt or fingerprints. Apply a small amount of epoxy to seal the crack. Let the epoxy completely dry before moving your window. This repair is simple and will save you money replacing your uPVC window.
Another common issue with uPVC windows is that the gasket of the window becomes weak or falling off from the frame. This will result in a loss of insulation and a opening for water or cold air into your home. This can be easily fixed by using an abrasive blade like a bank card to separate the gasket from the window frame. If you have a amount of time, you can also apply a bit of epoxy to the crack to make it look like the crack was never there in the first place.
If the crack is larger than you can reach it with your fingers, apply tape to shield the area from further damage. You can also use clear nail polish as a filler to stop the crack from expanding. It is essential to act fast upon noticing the crack. If you don't, it could expand and become more difficult to fix.
If you are looking for the most durable solution consider using uPVC epoxy to repair your cracked or broken glass. It's the most time-consuming solution, but will provide the best results for strength and appearance. Follow the directions of the manufacturer for applying the epoxy. After it is dry, use an acetone-soaked rag to clean the surface.
Water Leaks
uPVC windows are very durable, but they require some care and maintenance. If they're not maintained properly various issues could develop. These problems could range from water leaks around the frame to condensation inside the glass units.
A reputable uPVC window repair expert can help to identify the issue and then fix it. They can also give advice on how to prevent it from happening again in the future.
Leaking uPVC Windows can be a major issue and should be repaired immediately when they happen. If ignored, the damage could cause serious damp issues to your house, which can lead to costly repairs and a decrease in energy efficiency.
In a majority of instances, a leaky uPVC window can be fixed by a simple leak patch. This is a sealant which is applied to the inside of the window and will stop water from leaking into your home through the damaged area.
Double-glazed units that are misty or cloudy may be a sign of a leaky seal. This can be due to a number of reasons, including wear and tear, age weather conditions, or simply age.
You can prevent this by having your windows cleaned regularly. It is recommended that you clean your windows at a minimum of twice each year using an uncolored soft cloth that is soaked in warm soapy water. It is important to stay clear of using any colored cloths as this can leave dye stains on the plastic. For stubborn stains it is recommended to employ solvent PVC cleaner. It can be bought at any hardware store. It is easy to use. Make sure to clean the window frames in a shaded space away from direct sunlight to prevent streaks.
Problems with the hinges or locks
Over time a window hinge may become damaged or bent out of shape. This can cause a gap to form within the frame that will let in draughts and reduce the efficiency of your heating. A draft can also make your home uncomfortable and cold, and increase your heating bills.
A gap in a uPVC is an issue that can be easily fixed. A uPVC specialist will determine the issue and fix it for you. Usually, a small hole can be fixed with carpenter's glue and a wooden dowel that is inserted into the gap. The dowel should be placed in a manner that it is in line with the hinge leaf, and has a smooth surface. The adhesive of a carpenter is spread on the dowel, and then tapped into position. Once it's dry, a screw can then be driven into it to secure the hinge leaf.
www.repairmywindowsanddoors.co.uk and locks can become stiff to open and close as a result of general wear and tear or due to blockages caused by dirt and dust. These should be checked regularly and cleaned to ensure they are operating properly. A lubricant such as WD-40 is suggested to keep the moving parts in good working order.
It is recommended to wash UPVC windows at least once a year. The damp cloth should be immersed in the mixture of mild detergent and water. The areas around the corners of the window should be cleaned more often to prevent the accumulation of dirt and corrosion.
It can also be difficult to open or close the handle of uPVC windows. This could be the result of the handle falling or caused by problems with the locking mechanism. This is a straightforward and quick repair that can be completed by the homeowner by following a few simple steps.
A damaged lock could be an actual security risk since it could mean that your home is not secure and could be vulnerable to intruders. A damaged lock could cause your uPVC door or window difficult to open which can cause a hassle for you. If this is the case you might need a new handle or to align the multipoint locking system.
Stuck Handle
If your upvc handle is stuck and unable to move, it can be a frustrating. Particularly when you try to open your windows and find that it requires a lot more force or simply does not open at all. This is due to an electrical wire in the handle holder that has become rough. By simply undoing the handle and having a look at this wire, you are able to smooth out the rough area and this will fix your problem.
Another way this can be addressed is by putting a graphite or paraffin lubricant on the pole sliders, which will then allow the handle to move between up and down. It is also a great time to clean your handle as this will prevent further problems.
If the issue is related to the push button itself, this can be fixed by using superglue on it. Superglue should be completely dry before using it again. If the handle is damaged or broken, it can be replaced by purchasing a new one and screwing it in the right place. This is a much easier repair than replacing the entire window frame and is something you can do yourself, particularly if have access to the appropriate tools.